For those who often use moxibustion patches, they always encounter: after moxibustion, how to extinguish the moxibustion patches that have not been completely burned?

Some friends might think of using tap water to extinguish moxibustion patches, as tap water can easily extinguish the burning moxibustion patches. However, when it comes to reusing the moxibustion patches, it is difficult to ignite or, even if ignited, it is very easy to extinguish. This is because when moxibustion patches meet water, they are not completely dry, making it difficult to ignite. Even if ignited, they are very easy to extinguish. If it is a new moxibustion patch that has just been used, and it is difficult to ignite, you can consider whether it is due to dampness. Dry it in the sun and try to ignite it after it is dry.

Today, let me introduce to you, my moxibustion friends, how to extinguish moxibustion patches? There are several ways to extinguish moxibustion patches, which can easily help you extinguish them.

First, use stainless steel plate moxibustion patches fire extinguisher

Insert the moxibustion patch into the stainless steel moxibustion patch fire extinguisher and into the bottom. Then, hold the fire extinguisher steady with one hand and use the other hand to rotate the moxibustion patch up and down until it is completely extinguished and then remove it. Please ensure that the moxibustion patch is completely extinguished to prevent any accidents.

2. Use wooden moxibustion patch fire extinguisher

The method of extinguishing fire with this fire extinguisher is the same as that with the stainless steel moxibustion patch fire extinguisher. These two methods of extinguishing moxibustion patches are the same, except for the material, one being stainless steel and the other wooden. When using it, the size of the moxibustion patch should be referenced according to the diameter of the fire extinguisher’s nozzle.

3. Use glass bottles to extinguish moxibustion patches

At home, clean and dry the glass bottles used for fruit cans, drinks, etc., and the glass or ceramic bottles. The height of the bottle should be slightly higher than the length of the moxibustion patch. The purpose of this is that even if the remaining length of the moxibustion patch is long, it can still be placed in the bottle.

After placing the moxibustion patch in the bottle, tighten the cap until the moxibustion patch is completely extinguished, and then remove it.

It should be noted that when the ignited moxibustion patch is first placed in the bottle, one should be careful to prevent the bottle from cracking due to the high temperature. If there is collected moxibustion ash, some can be placed at the bottom of the bottle, and then the ignited moxibustion patch can be inserted to prevent the bottle from cracking.

4. Use wine bottles to extinguish moxibustion patches

If there are wine bottles used for drinking, do not throw them away. They can be cleaned, dried, and then the ignited moxibustion patch can be inserted into the bottle. The other procedures are the same as those for extinguishing with the stainless steel and wooden moxibustion patch fire extinguishers.

5. Use the ‘Wusao’ method to extinguish moxibustion patches

What is the ‘Wusao’ method? How to extinguish moxibustion patches? This method involves using all the containers available at home, cleaning and drying them, and then using them to extinguish moxibustion patches. If there are bottles that are missing the outer cap or the body, they can be combined for use according to the size of the containers. This method of extinguishing moxibustion patches can be said to embody the principle of using the strengths of each.

6. Cut off the ignited part of the moxibustion patch using scissors or a blade

You can use scissors to neatly cut off the ignited part from the root of the moxibustion patch, or use a blade to cut it off. Naturally, this method may result in some waste. Nowadays, with the advocacy of green living and saving resources, it is recommended to choose a specialized stainless steel plate moxibustion patch fire extinguisher for extinguishing fires.

Basic principle of extinguishing moxibustion patches:

The method of extinguishing moxibustion patches by using stainless steel plates and wooden fire extinguishers is an immediate method for extinguishing open flames. Using scissors to cut off the ignited part is a method of extinguishing fire by disconnecting the fuel source. Other methods involve allowing the moxibustion patches to burn without moving within the enclosed space, ultimately extinguishing due to insufficient oxygen. It is once again emphasized that it is best not to use tap water to extinguish moxibustion patches to prevent any impact on their application.