Among the two most common building materials in furniture panels are solid wood multi-layer board and solid wood particleboard. Many people ask, which one is better between solid wood multi-layer board and solid wood particleboard? There are still many people who do not know how to choose in the selection of boards. Therefore, let’s get to know which one is better between solid wood multi-layer board and solid wood particleboard below.

Firstly, which is better between solid wood multi-layer board and solid wood particleboard? Definition and introduction

1. Solid wood particleboard

Nowadays, the term ‘solid wood particleboard’ commonly used is plywood, which is a man-made board made from wood or other cellulose materials, with fine wood fibers on both sides and long-fiber wood fibers in the middle, bonded together with adhesive after heating and pressure. Plywood with decorative panels in cabinets, kitchen cabinets, etc. will have an additional process to make decorative panels, which can be used for laser cutting, pre-drilling, edge banding, and finally made into customized furniture and cabinets.

Secondly, which is better between solid wood multi-layer board and solid wood particleboard? Difference comparison

1. Solid wood particleboard low cost

The low cost of solid wood particleboard is the main point that many small brand merchants attack. The cost of solid wood particleboard is relatively low, the difficulty of secondary processing (furniture, wardrobe processing factory) is low, no painting is required, and it is convenient to make. In addition, China has supply chain advantages for solid wood particleboard, with large dealers such as Yatai and Lushuihe, which is conducive to cost control.

2. Solid wood particleboard decorative strength

Solid wood particleboard has strong decorative properties, performs well in waterproofing, resistance to scratching, and heat resistance, with a variety of colors and surfaces that can be flat or embossed. It is the most common spraying method for most kitchen cabinets and wardrobes.

3. Solid wood particleboard efficiency

Solid wood particleboard is suitable for large-scale machine processing and manufacturing, with good precision control, high production capacity, convenient transportation, and core competitiveness in cost and efficiency.

4. Solid wood multi-layer board reliability

Solid wood multi-layer board has good compressive strength and reliability. It has the advantages of light material, high compressive strength, excellent ductility and extensibility, resistance to impact and vibration, easy processing and painting, and insulation. Among the same well-known brand and the same thickness of board, solid wood multi-layer board is more expensive than solid wood particleboard. In terms of environmental protection, both of these boards need to use a lot of strong glue, and it is necessary to do a good job of edge treatment during construction to reduce environmental pollution.

5. Solid wood multi-layer board resistance to cracking

Solid wood multi-layer board is not the same as plywood or high-density board. In a strict sense, it belongs to the category of solid wood panels. Solid wood multi-layer board is made by layering thin solid wood boards horizontally and vertically and adding them layer by layer. It has been used for many years abroad, is very popular, and is commonly seen in furniture and interior decoration. Solid wood multi-layer board is better than wood in terms of resistance to cracking and deformation, and is a good board. Good solid wood multi-layer board is not much worse than wood.